nxosv9k-7.0.3.I7.4.qcow2

[darko]

This is for a new EVENG pro, followed https://www.eve-ng.net/index.php/docume ... 0v-switch/

Step 4 fails, see below. Please advise:


switch# dir bootflash:
4096 Oct 24 06:08:13 2020 .rpmstore/
4096 Oct 24 06:08:49 2020 .swtam/
1420 Oct 24 06:10:18 2020 20201024_061012_poap_31827_init.log
1339749888 Aug 20 16:21:45 2019 nxos.9.2.4.bin
0 Oct 24 06:10:49 2020 platform-sdk.cmd
4096 Oct 24 06:10:05 2020 scripts/
4096 Oct 24 06:09:23 2020 virt_strg_pool_bf_vdc_1/
4096 Oct 24 06:09:28 2020 virtual-instance/
59 Oct 24 06:09:19 2020 virtual-instance.conf

Usage for bootflash://sup-local
1518981120 bytes used
1951129600 bytes free
3470110720 bytes total
switch# 2020 Oct 24 06:10:59 switch %$ VDC-1 %$ %ACLQOS-SLOT1-2-ACLQOS_FAILED: ACLQOS failure: TCAM region is not configured for feature QoS class IPv4 direction ingress. Please configure TCAM region Ingress COPP [copp] and retry the command.
2020 Oct 24 06:11:01 switch %$ VDC-1 %$ %ASCII-CFG-2-CONF_CONTROL: System ready

switch# conf t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
switch(config)#
switch(config)#
switch(config)# 2020 Oct 24 06:12:14 switch %$ VDC-1 %$ %VMAN-2-ACTIVATION_STATE: Successfully activated virtual service 'guestshell+'
2020 Oct 24 06:12:14 switch %$ VDC-1 %$ %VMAN-2-GUESTSHELL_ENABLED: The guest shell has been enabled. The command 'guestshell' may be used to access it, 'guestshell destroy' to remove it.

switch(config)#
switch(config)#
switch(config)#
switch(config)#
switch(config)# boot nxos bootflash:nxos.7.0.3.I7.4.bin
Image provided does not exist.
Failed to set the boot variable: image not found (0x40450008)
switch(config)# boot nxos bootflash:nxos.7.0.3.I7.4.bin
Image provided does not exist.
Failed to set the boot variable: image not found (0x40450008)
switch(config)#

[Uldis (UD)]

no idea where you got this image, but flash is showing

nxos.9.2.4.bin

not what you trying to set