nodes won't start

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
naornaor12345
Posts: 6
Joined: Fri May 12, 2017 7:07 pm

nodes won't start

Post by naornaor12345 » Thu Sep 28, 2017 4:41 pm

===update== i tried uploading the images again and now i have another problem, i got an error message : failed to start node (12)


hello, i'm trying to start cisco ios 3725,7200 and the same problem accured for both, they start for 2 seconds and then turn to the stop mode again..
i'm running vmware workstation - linux ubuntu 64bit and have eunogh space.
Last edited by naornaor12345 on Sat Sep 30, 2017 9:55 am, edited 1 time in total.

ramindia
Posts: 409
Joined: Sun Mar 19, 2017 10:27 pm

Re: nodes won't start

Post by ramindia » Thu Sep 28, 2017 5:24 pm

naornaor12345 wrote:
Thu Sep 28, 2017 4:41 pm
hello, i'm trying to start cisco ios 3725,7200 and the same problem accured for both, they start for 2 seconds and then turn to the stop mode again..
i'm running vmware workstation - linux ubuntu 64bit and have eunogh space.
More Logs and provide hardware information help you better.

if you get chance provide information as mentioned in the below URL.

http://www.eve-ng.net/forum/viewtopic.php?f=3&t=1049

R!

naornaor12345
Posts: 6
Joined: Fri May 12, 2017 7:07 pm

Re: nodes won't start

Post by naornaor12345 » Thu Sep 28, 2017 5:54 pm

these are the result for the script you asked.
please share your knowledge and help me :)

wget http://balajibandi.com/evenginfo.sh
--2017-09-28 20:49:51-- http://balajibandi.com/evenginfo.sh
Resolving balajibandi.com (balajibandi.com)... 202.63.96.9
Connecting to balajibandi.com (balajibandi.com)|202.63.96.9|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1893 (1.8K) [text/x-sh]
Saving to: 'evenginfo.sh'

evenginfo.sh 100%[===================>] 1.85K --.-KB/s in 0.001s

2017-09-28 20:49:52 (3.27 MB/s) - 'evenginfo.sh' saved [1893/1893]



***** EVE-NG INFORMATION TOOL - CREATED BY R! ******
Thu Sep 28 20:50:49 IDT 2017

***** EVE-NG VERSION INSTALLED *****
eve-ng 2.0.3-79

***** HOSTNAME INFORMATION *****
Static hostname: eve-ng
Virtualization: vmware
Operating System: Ubuntu 16.04.3 LTS
Kernel: Linux 4.9.40-eve-ng-ukms-2+
Architecture: x86-64

***** FILE SYSTEM DISK SPACE USAGE *****
Filesystem Size Used Avail Use% Mounted on
udev 973M 0 973M 0% /dev
tmpfs 198M 13M 186M 7% /run
/dev/mapper/eve--ng--vg-root 27G 3.0G 23G 12% /
tmpfs 990M 0 990M 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 990M 0 990M 0% /sys/fs/cgroup
/dev/sda1 472M 82M 366M 19% /boot
tmpfs 198M 0 198M 0% /run/user/0

***** CPU INFORMATION *****
model name : Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz

***** FREE AND USED MEMORY *****
total used free shared buff/cache available
Mem: 1.9G 345M 528M 33M 1.1G 1.3G
Swap: 2.0G 0B 2.0G

***** INTERFACE INFORMATION *****
pnet0 8000.000c297d792f no eth0
pnet1 8000.000000000000 no
pnet2 8000.000000000000 no
pnet3 8000.000000000000 no
pnet4 8000.000000000000 no
pnet5 8000.000000000000 no
pnet6 8000.000000000000 no
pnet7 8000.000000000000 no
pnet8 8000.000000000000 no
pnet9 8000.000000000000 no

***** KVM CHECK INFORMATION *****
INFO: /dev/kvm exists
KVM acceleration can be used

***** APACHE STATUS *****
* apache2.service - LSB: Apache2 web server
Active: active (running) since Thu 2017-09-28 18:07:12 IDT; 2h 43min ago

***** CHECKING INERNET STATUS *****
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=58 time=77.8 ms

--- 8.8.8.8 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 77.840/77.840/77.840/0.000 ms

***** COPY or SCREENSHOT THIS INFORMATION FOR EVE SUPPORT TO HELP/UNDERSTAND YOUR SYSTEM INFORMATION.******
***** http://www.eve-ng.net/forum/ ******
root@eve-ng:~#

ramindia
Posts: 409
Joined: Sun Mar 19, 2017 10:27 pm

Re: nodes won't start

Post by ramindia » Thu Sep 28, 2017 10:18 pm

total used free shared buff/cache available
Mem: 1.9G 345M 528M 33M 1.1G 1.3G
Swap: 2.0G 0B 2.0G


This is too low RAM, Get more RAM.

R!

naornaor12345
Posts: 6
Joined: Fri May 12, 2017 7:07 pm

Re: nodes won't start

Post by naornaor12345 » Fri Sep 29, 2017 5:18 am

expended the ram and hardware but nothing changed..
do i need to do anything after changing the ram and hardware in the vmware?


root@eve-ng:~# wget http://balajibandi.com/evenginfo.sh
--2017-09-29 08:16:34-- http://balajibandi.com/evenginfo.sh
Resolving balajibandi.com (balajibandi.com)... 202.63.96.9
Connecting to balajibandi.com (balajibandi.com)|202.63.96.9|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1893 (1.8K) [text/x-sh]
Saving to: 'evenginfo.sh.1'

evenginfo.sh.1 100%[===================>] 1.85K --.-KB/s in 0s

2017-09-29 08:16:34 (98.8 MB/s) - 'evenginfo.sh.1' saved [1893/1893]



root@eve-ng:~# ./evenginfo.sh
***** EVE-NG INFORMATION TOOL - CREATED BY R! ******
Fri Sep 29 08:17:03 IDT 2017

***** EVE-NG VERSION INSTALLED *****
eve-ng 2.0.3-79

***** HOSTNAME INFORMATION *****
Static hostname: eve-ng
Virtualization: vmware
Operating System: Ubuntu 16.04.3 LTS
Kernel: Linux 4.9.40-eve-ng-ukms-2+
Architecture: x86-64

***** FILE SYSTEM DISK SPACE USAGE *****
Filesystem Size Used Avail Use% Mounted on
udev 2.0G 0 2.0G 0% /dev
tmpfs 394M 15M 379M 4% /run
/dev/mapper/eve--ng--vg-root 27G 3.1G 23G 12% /
tmpfs 2.0G 0 2.0G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
/dev/sda1 472M 113M 335M 26% /boot
tmpfs 394M 0 394M 0% /run/user/0

***** CPU INFORMATION *****
model name : Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz

***** FREE AND USED MEMORY *****
total used free shared buff/cache available
Mem: 3.8G 373M 2.7G 35M 742M 3.1G
Swap: 2.0G 0B 2.0G

***** INTERFACE INFORMATION *****
pnet0 8000.000c297d792f no eth0
pnet1 8000.000000000000 no
pnet2 8000.000000000000 no
pnet3 8000.000000000000 no
pnet4 8000.000000000000 no
pnet5 8000.000000000000 no
pnet6 8000.000000000000 no
pnet7 8000.000000000000 no
pnet8 8000.000000000000 no
pnet9 8000.000000000000 no

***** KVM CHECK INFORMATION *****
INFO: /dev/kvm exists
KVM acceleration can be used

***** APACHE STATUS *****
* apache2.service - LSB: Apache2 web server
Active: active (running) since Fri 2017-09-29 08:10:34 IDT; 6min ago

***** CHECKING INERNET STATUS *****
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=58 time=75.3 ms

--- 8.8.8.8 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 75.381/75.381/75.381/0.000 ms

***** COPY or SCREENSHOT THIS INFORMATION FOR EVE SUPPORT TO HELP/UNDERSTAND YOUR SYSTEM INFORMATION.******
***** http://www.eve-ng.net/forum/ ******
root@eve-ng:~#

ramindia
Posts: 409
Joined: Sun Mar 19, 2017 10:27 pm

Re: nodes won't start

Post by ramindia » Fri Sep 29, 2017 7:10 am

After extended the ram, you need to stop the VM and start again

check any antivirus ? and post the error logs.


R!

naornaor12345
Posts: 6
Joined: Fri May 12, 2017 7:07 pm

Re: nodes won't start

Post by naornaor12345 » Fri Sep 29, 2017 8:23 am

ramindia wrote:
Fri Sep 29, 2017 7:10 am
After extended the ram, you need to stop the VM and start again

check any antivirus ? and post the error logs.


R!
i did restart the vmware and i even turned off my antivirus and still does the same problem.
i got no error log, the node just turns to the triangle (play) status for 2 seconds and then tuns back to the square (stop) status.
any thoughts?

ramindia
Posts: 409
Joined: Sun Mar 19, 2017 10:27 pm

Re: nodes won't start

Post by ramindia » Fri Sep 29, 2017 7:55 pm

naornaor12345 wrote:
Fri Sep 29, 2017 8:23 am
ramindia wrote:
Fri Sep 29, 2017 7:10 am
After extended the ram, you need to stop the VM and start again

check any antivirus ? and post the error logs.


R!
i did restart the vmware and i even turned off my antivirus and still does the same problem.
i got no error log, the node just turns to the triangle (play) status for 2 seconds and then tuns back to the square (stop) status.
any thoughts?
i am sure something wrong, have you fixed the permission

/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

if this is not solved you need to get in to eve-ng skype group and give permission to your PC to look the issue.

R!

naornaor12345
Posts: 6
Joined: Fri May 12, 2017 7:07 pm

Re: nodes won't start

Post by naornaor12345 » Sat Sep 30, 2017 8:47 am

===update== i tried uploading the images again and now i have another problem, i got an error message : failed to start node (12)

i think maybe it's something with the idle pc parameters, how can i check thse parameters or try giving new parameters?
ramindia wrote:
Fri Sep 29, 2017 7:55 pm
naornaor12345 wrote:
Fri Sep 29, 2017 8:23 am
ramindia wrote:
Fri Sep 29, 2017 7:10 am
After extended the ram, you need to stop the VM and start again

check any antivirus ? and post the error logs.


R!
i did restart the vmware and i even turned off my antivirus and still does the same problem.
i got no error log, the node just turns to the triangle (play) status for 2 seconds and then tuns back to the square (stop) status.
any thoughts?
i am sure something wrong, have you fixed the permission

/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

if this is not solved you need to get in to eve-ng skype group and give permission to your PC to look the issue.

R!

naornaor12345
Posts: 6
Joined: Fri May 12, 2017 7:07 pm

Re: nodes won't start

Post by naornaor12345 » Sat Sep 30, 2017 9:48 pm

===update== i tried uploading the images again and now i have another problem, i got an error message : failed to start node (12)
any help?

Post Reply