Support and News Forum

Hi,

Is there anyone manage to run XRv 9k 6.2.x with Gige interfaces? I've managed to boot it up but no gige interfaces except mgmt interface. Any comments?

RP/0/RP0/CPU0:ios#sh ver
Sun Dec 10 10:01:58.931 UTC

Cisco IOS XR Software, Version 6.2.25
Copyright (c) 2013-2017 by Cisco Systems, Inc.

Build Information:
Built By : ahoang
Built On : Thu Sep 28 20:50:39 PDT 2017
Build Host : iox-lnx-058
Workspace : /auto/srcarchive12/production/6.2.25/xrv9k/workspace
Version : 6.2.25
Location : /opt/cisco/XR/packages/

cisco IOS-XRv 9000 () processor
System uptime is 5 minutes

RP/0/RP0/CPU0:ios#sh ip int brief
Sun Dec 10 10:02:02.248 UTC

Interface IP-Address Status Protocol Vrf-Name
MgmtEth0/RP0/CPU0/0 unassigned Shutdown Down default

Thanks.

it is super heavy Node, and even on my dual X5680 server it wont work.
It need newer CPUs like E5-26XX or bare installed EVE.

UD

After putting the image (hda.qcow2) into directory name "xrv9k-xxxx" instead of "xrv-k9-xxx", it works but it consumes a lot of memory and vCPU like 16GB and 4 vCPUs.
FYI, my server spec is Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz and 32GB memory.

Cheers

weak CPU as well

you didn' t tell me that wrong was directory name

topic closed