Support and News Forum

When I connect devices in the gui and then do show cdp neighbors the devices are not on the correct interfaces.

Linux eve-ng-1 4.9.40-eve-ng-ukms-2+ #4 SMP Fri Sep 15 02:07:02 CEST 2017 x86_64 x86_64 x86_64 GNU/Linux

12 CPUs x Intel(R) Xeon(R) CPU X5650 @ 2.67GHz
63.99 GB
Local HP Disk (naa.600508b1001c121059333bb9dc6e3871)
Type:
Disk Model:
LOGICAL VOLUME

Capacity:
820.21 GB

8 x 146 GB 15k SAS
sh cdp neighbors output
dc1-core-1#sh cdp neighbors

Device ID Local Intrfce Holdtme Capability Platform Port ID
dc2-core-2 Gig 9 162 R I CSR1000V Gig 4
dc2-core-1 Gig 8 162 R I CSR1000V Gig 4
dc1-core-2 Gig 7 162 R I CSR1000V Gig 7

dc1-core-2#sh cdp neighbors

Device ID Local Intrfce Holdtme Capability Platform Port ID
dc2-core-2 Gig 9 162 R I CSR1000V Gig 5
dc1-core-1 Gig 7 162 R I CSR1000V Gig 7
dc2-core-1 Gig 8 162 R I CSR1000V Gig 5

dc2-core-1#sh cdp neighbors

Device ID Local Intrfce Holdtme Capability Platform Port ID
dc2-core-2 Gig 1 162 R I CSR1000V Gig 1
dc1-core-1 Gig 4 162 R I CSR1000V Gig 8
dc1-core-2 Gig 5 162 R I CSR1000V Gig 8

Device ID Local Intrfce Holdtme Capability Platform Port ID
dc1-core-1 Gig 4 162 R I CSR1000V Gig 9
dc2-core-1 Gig 1 162 R I CSR1000V Gig 1
dc1-core-2 Gig 5 162 R I CSR1000V Gig 9

You my dear messed up a things, then, CSRv100 porting is totally correct
Thread closed