Support and News Forum

Posted: **Thu Jun 11, 2020 1:22 am**

Hello,

I added windows machine following the steps at (https://www.eve-ng.net/index.php/docume ... n-the-eve/)
But, on steps #9 it does not start and does not go blue. If I change to QEMU tpl(4.1.0) and QEMU Nic tpl (e1000) it does start but then on step #10 It does not show the "HDD RedHat VIRTIO SCSI HDD" just goes blank

I am using OVF v 2.0.3-110, CPU: intel i5 8th G vpro @1.70 GHz 1.90, 16 RAM, HD SSD 237GB “kvm-ok: kvm acceletation can be used”

any idea?

Regards,

Posted: **Thu Jun 11, 2020 6:28 am**

yes step 7 is not mandatory, but HDD you must very carefully choose directoey on fdd B.
it is known pitfall of any user..
To selecet driver you must choose exactly path:
FDD B/storage/2003R2/AMD64 or x86,

Uldis

Posted: **Thu Jun 11, 2020 9:21 pm**

Uldis (UD) wrote: ↑
Thu Jun 11, 2020 6:28 am
yes step 7 is not mandatory, but HDD you must very carefully choose directoey on fdd B.
it is known pitfall of any user..
To selecet driver you must choose exactly path:
FDD B/storage/2003R2/AMD64 or x86,

Uldis
[tks for your post, "FDD B/storage/2003R2/AMD64 or x86" is what I'm choosing. Both, one at the time, "just in case" but the same thing, I just get a white screen after this step. ]

Posted: **Fri Jun 12, 2020 7:08 am**

i dont believe in it.
Visit our live helpdesk for advice then.

https://www.eve-ng.net/index.php/live-helpdesk/
use gmail to join

Support and News Forum

Windows machine node not starting

Windows machine node not starting

Re: Windows machine node not starting

Re: Windows machine node not starting

Re: Windows machine node not starting