Support and News Forum

Hi everyone there,

Since last two weeks i am facing an issue related to PING. The details are as below:

1. Each Lab was till this problem lost the configurations.
2. Each new lab after this issue have problem with PING, TELNET etc.
3. I just created a new lab with 2 Cisco Routers and 2 Cisco Switches to ensure that there is no issue with my configurations (Simple toplogy).
4. In attached Toplogy, the neighbours will be discovered and shown in the table.
5. Inspite of neighbour discovery I can not PING even to directly connected devices.
6. In case of e.g: OSPF neighbours do not show adjacency message.

I used different Routers and Swithces to check, unfortunately the same problem.


May be some one can resolve this issue.


Thanks


Badar

No idea what you are talking about, ut no such issues.
Simply your devices must be started
screen above shows that all nodes are stopped on lab topology

You r right that all devices were stoped at the time, I made a screen shot.
I am sharing the screen shots with devices powered on and Ping request (To directly connected Routers, but failed)
Please review and suggess any solution.

never had such issues, only one report was about icmp issue when image was badly made...
vios works all right
and this connection p2p is not eve issue now

Any luck?
Getting same issue suddenly in eve-ng.

Even i can not ping VPC each other connected directly.

Each VPC is exchanging ARP. but can not ping each other.

TCPdump shows icmp is generated from host A but not seen in host B if i take tcpdump from host B interface.

Please help me.

Banik

You better visit eVE Live chat.
https://www.eve-ng.net/index.php/live-helpdesk/

use your gmail to join.