I’m confused and have been banging my head against the wall with this. I’m studying for my CCNP and would like to get eve-ng setup on a physical server with ubuntu 16 as the os, per eve-ng request. The server I’m interested is an:
HP ProLiant DL360 G7 4B Server 2X 2.66GHz X5650 12-Cores Total 32GB RAM 4X 146GB 10K SAS HDD No OS(Renewed)
Questions:
Is that enough cores? RAM?
Am I going to be able to install Ubuntu on this server? I noticed that the Ubuntu 16 server image install recommended an AMD architecture, however EVE-NG recommends Intel. Will run into issues with this, as I suspect? check the quote below for non-intel processors per eve-ng.
“In other words the EVE-NG requirements are the same for nested ESXi virtualization or Cisco VIRL/CML. EVE-NG can still work without Intel VT processors and can run installed within other hypervisors also But:
64 bits (x86_64) appliances won’t work. Poor performances should be expected with 32 bits (i386) appliances.”
Eve-ng bare metal setup?
Moderator: mike
-
- Posts: 1
- Joined: Wed Jan 12, 2022 1:55 pm
-
- Posts: 5180
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Eve-ng bare metal setup?
very old server actually
it does support EPT nested virtualization, but indeed its very weak and old
it does support EPT nested virtualization, but indeed its very weak and old