Eve-ng bare metal setup?
Posted: Wed Jan 12, 2022 1:58 pm
I’m confused and have been banging my head against the wall with this. I’m studying for my CCNP and would like to get eve-ng setup on a physical server with ubuntu 16 as the os, per eve-ng request. The server I’m interested is an:
HP ProLiant DL360 G7 4B Server 2X 2.66GHz X5650 12-Cores Total 32GB RAM 4X 146GB 10K SAS HDD No OS(Renewed)
Questions:
Is that enough cores? RAM?
Am I going to be able to install Ubuntu on this server? I noticed that the Ubuntu 16 server image install recommended an AMD architecture, however EVE-NG recommends Intel. Will run into issues with this, as I suspect? check the quote below for non-intel processors per eve-ng.
“In other words the EVE-NG requirements are the same for nested ESXi virtualization or Cisco VIRL/CML. EVE-NG can still work without Intel VT processors and can run installed within other hypervisors also But:
64 bits (x86_64) appliances won’t work. Poor performances should be expected with 32 bits (i386) appliances.”
HP ProLiant DL360 G7 4B Server 2X 2.66GHz X5650 12-Cores Total 32GB RAM 4X 146GB 10K SAS HDD No OS(Renewed)
Questions:
Is that enough cores? RAM?
Am I going to be able to install Ubuntu on this server? I noticed that the Ubuntu 16 server image install recommended an AMD architecture, however EVE-NG recommends Intel. Will run into issues with this, as I suspect? check the quote below for non-intel processors per eve-ng.
“In other words the EVE-NG requirements are the same for nested ESXi virtualization or Cisco VIRL/CML. EVE-NG can still work without Intel VT processors and can run installed within other hypervisors also But:
64 bits (x86_64) appliances won’t work. Poor performances should be expected with 32 bits (i386) appliances.”