Linux image not work

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
dspitsyn
Posts: 1
Joined: Thu Feb 03, 2022 6:43 pm

Linux image not work

Post by dspitsyn » Thu Feb 03, 2022 6:55 pm

Hi all. There is the following problem, virtual Linux machines do not see the hard drive.
Error: booting from Hard Disk...
Boot failed: not a bootable disk.
I am installing according to the instructions on the website, booting from cdrom and installing to hard drive, then i see the error. The worst thing is that my tinycore linux, which used to work, does not boot anymore.
I could not find a solution to this problem on the internet. I can't figure out where the hard drives of the virtual machines are stored and where the libvirt folder is stored, which seems to need to edit the configuration file.
The strangest thing is that the installation of the distribution passes without errors, which means that the system sees the hard disk.

Uldis (UD)
Posts: 5180
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Linux image not work

Post by Uldis (UD) » Fri Feb 04, 2022 12:02 am

Images are not loaded properly.
If durin start it says no boot image, means image is created wrongly
We have bunch with linux images already prepared and ready to use..
https://www.eve-ng.net/index.php/docume ... ost-image/

Post Reply