Wirehark Does Not Capture a Traffic on EVE-NG
Posted: Mon Feb 14, 2022 7:09 pm
If you have this issue try to check the cmd in Wireshark, if you see this message at the end "connection abandoned"
Try to follow the below steps (For Windows only):
1. Go to Command line.
2. From CMD go to this path by this command : "CD C:\Program Files\EVE-NG>plink.exe root@192.168.1.17''
(Note that the IP must be for EVE-NG I used this IP for an example)
3. Press Y/y as you can see from the below image.
4. lastly, enter your username & password
I hope this is informative for you & Thanks
The reference in the link:
Try to follow the below steps (For Windows only):
1. Go to Command line.
2. From CMD go to this path by this command : "CD C:\Program Files\EVE-NG>plink.exe root@192.168.1.17''
(Note that the IP must be for EVE-NG I used this IP for an example)
3. Press Y/y as you can see from the below image.
4. lastly, enter your username & password
I hope this is informative for you & Thanks
The reference in the link:
Code: Select all
https://ask.wireshark.org/question/17901/when-wireshark-in-eve-ng-shows-message-connection-abandoned/