Support and News Forum

I have read through this who broad for my issue and the solutions, none of the solutions provided work for me.
Issue - vManage, vEdge and vBond will start and then stop a few seconds later. vSmart will boot up just fine. I have used numerus versions from 18 to 20 of the images, and even downloaded fresh images from Cisco. Same result

My host machine is an
-HP ProLiant DL380 Gen9
-Dual Intel(R) Xeon(R) CPU E5-2683 v4 @ 2.10GHz 16 core , total 64 threads
-768gb of RAM
-10TB SSD

EVE-NG version is the latest and I have the following allocated
-32vCPU's
-56GB Ram
-2.2TB

vManage is allocated 4 CPU's and 24gb of RAM - I have tried increasing to 8CPU's as well as well as the extra 100g drive
vEdge and vBond are allocated 2 CPU's and 2gb of RAM.

I followed the documentation to the letter
folder names are as required, as are the image names virtioa, virtiob as needed.

All my other Cisco images work fine

Im not sure what else to try, and I do not know where to find any logs as to what is going on. When I boot the images, I get a success. Also EVE-NG system resources are all below 10%

Issue resolved - Changed QEMU version to 5.2.0 under node settings and the nodes started up with no issues.