Page 1 of 1
Riverbed problem - % Internal error (code 1003)
Posted: Mon May 15, 2017 11:04 am
by yellow_tiger
Hi Team, i have problem with riverbed, please see my error bellow.
Here is virtual vcx 255 , i make they by instruction:
# mkdir /opt/unetlab/addons/qemu/riverbed-vcx9.6.0/
scp image_rbt_vcx_9_2_0_n8_x86_64.ova into /opt/unetlab/addons/qemu/riverbed-vcx9.2.0/
# cd /opt/unetlab/addons/qemu/riverbed-vcx9.6.0/
# tar xf image_rbt_vcx_9_2_0_n8_x86_64.ova
# /opt/qemu/bin/qemu-img convert -f vmdk -O qcow2 image-vcx-disk1.vmdk virtioa.qcow2
# /opt/qemu/bin/qemu-img convert -f vmdk -O qcow2 image-vcx-disk2.vmdk virtiob.qcow2
# /opt/unetlab/wrappers/unl_wrapper -a fixpermissions
NOTE:
disregard cdrom complain when booting
it will probably boot 2x when power on for the first time and will take around 15min to get login prompt
Here is EVE NG
Code: Select all
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0# uname -a
Linux eve-ng 4.4.14-eve-ng-ukms+ #1 SMP Mon Dec 19 23:28:33 CET 2016 x86_64 x86_64 x86_64 GNU/Linux
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0# dpkg -l eve-ng
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-=========================================-=========================-=========================-========================================================================================
ii eve-ng 2.0.3-60 amd64 A new generation software for networking labs.
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0# pwd
/opt/unetlab/addons/qemu/riverbed-vcx9.6.0
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0# ll
total 4330460
drwxr-xr-x 2 root root 4096 May 15 11:34 ./
drwxr-xr-x 4 root root 4096 May 12 14:34 ../
-rw-r--r-- 1 root root 1042513920 May 15 10:46 image_rbt_vcx_esx_9_6_0a_n6_x86_64_255.ova
-rw-r--r-- 1 64 64 1042408448 Apr 19 11:29 image-vcx-disk1.vmdk
-rw-r--r-- 1 64 64 86528 Apr 19 11:32 image-vcx-disk2.vmdk
-rw-r--r-- 1 64 64 200 Apr 19 11:32 image-vcx.mf
-rw-r--r-- 1 root root 6817 Apr 19 11:32 image-vcx.ovf
-rw-r--r-- 1 root root 2349072384 May 15 11:34 virtioa.qcow2
-rw-r--r-- 1 root root 458752 May 15 11:35 virtiob.qcow2
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
Here is my error:
Code: Select all
Riverbed SteelHead
localhost login:
Riverbed SteelHead
localhost login: admin
Password:
Last login: Mon May 15 10:50:37 on ttyS0
>
>
>
> ena
# conf t
(config) #
(config) #
(config) #
(config) # show version
Product name: rbt_sh
Product release: 9.6.0a
Build ID: #6
Build date: 2017-04-18 22:47:18
Build arch: x86_64
Built by: mockbuild@bannow-worker8
Uptime: 1h 28m 52s
Product model: VCX
System memory: 706 MB used / 7292 MB free / 7998 MB total
Number of CPUs: 4
CPU load averages: 0.86 / 0.81 / 0.78
(config) #
(config) #
(config) #
(config) # htcgetattr: Inappropriate ioctl for device
ostls: cannot access /proc/rbtqosmod/inpath*/core_stats: No such file or directory
% Incomplete command.
Type "host ?" for help.
(config) #
(config) # hostname riverbed-lab1
% Internal error: module commit side_effect function of the module fips_checker
(config) #
(config) #
(config) # write memory
% Internal error (code 1003)
(config) #
(config) #
(config) # show running-config
(config) #
(config) #
(config) # tcgetattr: Inappropriate ioctl for device
nols: cannot access /proc/rbtqosmod/inpath*/core_stats: No such file or directory
% Incomplete command.
Type "no ?" for help.
(config) # no interface primary dhcp
% Internal error: module commit side_effect function of the module fips_checker
(config) #
(config) #
CLI is not properly working!
Re: Riverbed problem - % Internal error (code 1003)
Posted: Mon May 15, 2017 5:03 pm
by Uldis (UD)
first thing be sure that antivirus is not onspecting your virtual machines !!!!!!!!!!!!!
and clean up all other stuff from image dir, leave only on virtio hdds inside
Re: Riverbed problem - % Internal error (code 1003)
Posted: Thu May 18, 2017 1:25 pm
by yellow_tiger
Uldis (UD) wrote: ↑Mon May 15, 2017 5:03 pm
first thing be sure that antivirus is not onspecting your virtual machines !!!!!!!!!!!!!
and clean up all other stuff from image dir, leave only on virtio hdds inside
Hello Dear Uldis, thank you for update!
I make clean directories, but problem is still exist
Code: Select all
root@eve-ng:~# !70
cd /opt/unetlab/addons/qemu/riverbed-vcx9.6.0/
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0# ll
total 4330460
drwxr-xr-x 2 root root 4096 May 15 11:34 ./
drwxr-xr-x 4 root root 4096 May 12 14:34 ../
-rw-r--r-- 1 root root 1042513920 May 15 10:46 image_rbt_vcx_esx_9_6_0a_n6_x86_64_255.ova
-rw-r--r-- 1 64 64 1042408448 Apr 19 11:29 image-vcx-disk1.vmdk
-rw-r--r-- 1 64 64 86528 Apr 19 11:32 image-vcx-disk2.vmdk
-rw-r--r-- 1 64 64 200 Apr 19 11:32 image-vcx.mf
-rw-r--r-- 1 root root 6817 Apr 19 11:32 image-vcx.ovf
-rw-r--r-- 1 root root 2349072384 May 15 11:34 virtioa.qcow2
-rw-r--r-- 1 root root 458752 May 15 11:35 virtiob.qcow2
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0# rm -rf image*
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0# ll
total 2294292
drwxr-xr-x 2 root root 4096 May 18 10:48 ./
drwxr-xr-x 4 root root 4096 May 12 14:34 ../
-rw-r--r-- 1 root root 2349072384 May 15 11:34 virtioa.qcow2
-rw-r--r-- 1 root root 458752 May 15 11:35 virtiob.qcow2
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0# !82
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0# date
Thu May 18 10:49:08 EEST 2017
root@eve-ng:/opt/unetlab/addons/qemu/riverbed-vcx9.6.0#
Re: Riverbed problem - % Internal error (code 1003)
Posted: Fri May 19, 2017 8:32 am
by mcat84
I have tried on version 9.2.0-n8.....no problem.....booting is ok...within 1 minutes....
maybe you can try on older version first to confirm
(running on bare metal, i7 processor, ssd hard disk)
Re: Riverbed problem - % Internal error (code 1003)
Posted: Fri May 19, 2017 9:42 am
by yellow_tiger
mcat84 wrote: ↑Fri May 19, 2017 8:32 am
I have tried on version 9.2.0-n8.....no problem.....booting is ok...within 1 minutes....
maybe you can try on older version first to confirm
(running on bare metal, i7 processor, ssd hard disk)
Hi dear mcat84 , it is good news)) thank you!
But where is take this image - vcx 255 9.2.0 ?
i have only 9.6.0a ,
i am google it (find 9.2.0), but not successful!
Please share this image or give me link.
I think about it, that i need for test 9.2.0
Thank you!
Re: Riverbed problem - % Internal error (code 1003)
Posted: Fri May 19, 2017 1:56 pm
by yellow_tiger
Hi Dear Team, i find image on oficial site
i will testing and update case later (after test) thank you!
https://support.riverbed.com/content/su ... iance.html
Virtual SteelHead VCX Software Image (OVA) - Includes support for FIPS mode
Version 9.2.0 (64-bit)
Models CX series Virtual Steelhead May 5, 2016 Software (941.2 MB)
Checksum
*Alert*
Release Notes
Re: Riverbed problem - % Internal error (code 1003)
Posted: Sat May 20, 2017 5:11 am
by mcat84
ok....for version 9.6.0a download the kvm image
image_rbt_vcx_kvm_9_6_0a_n6_x86_64.tgz
1. create directory
mkdir /opt/unetlab/addons/qemu/riverbed-9.6.0a-n6/
2. Extract your image_rbt_vcx_kvm_9_6_0a_n6_x86_64.tgz to /opt/unetlab/addons/qemu/riverbed-9.6.0a-n6/
tar xvf image_rbt_vcx_kvm_9_6_0a_n6_x86_64.tgz
3. rename the mgmt.img to virtioa.qcow2
mv mgmt.img virtioa.qcow2
4. create 2GB datastore
/opt/qemu/bin/qemu-img create -f qcow2 /opt/unetlab/addons/qemu/riverbed-9.6.0a-n6/virtiob.qcow2 2G
5. fix permissions
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
bootup slightly slow first/second time...just wait....(around 1 mins+)....then the usual SCC setup and bla bla bla will prompt....
Re: Riverbed problem - % Internal error (code 1003)
Posted: Sat Jun 03, 2017 2:48 pm
by yellow_tiger
Hello Dear mcat84, all working fine
BIG BIG Thank you very much!!!
Great reply from you with instructions!
Code: Select all
Riverbed SteelHead
test1 login: admin
Password:
Last login: Sat Jun 3 14:35:34 on tty1
System initializing.....
Done!
test1 >
test1 >
test1 > ena
test1 # show version
Product name: rbt_sh
Product release: 9.6.0a
Build ID: #6
Build date: 2017-04-18 22:47:18
Build arch: x86_64
Built by: mockbuild@bannow-worker8
Uptime: 2m 22s
Product model: VCX (VCX10)
System memory: 895 MB used / 2999 MB free / 3894 MB total
Number of CPUs: 2
CPU load averages: 2.16 / 0.66 / 0.23
test1 #
test1 # conf t
test1 (config) #
test1 (config) #
test1 (config) # show info
Current User: admin
Status: Critical
Config: initial
Appliance Up Time: 2m 41s
Service Up Time: Not Running
Managed by CMC: no
Serial: 0
Model: VCX (VCX10)
Revision: A
Version: 9.6.0a
<<Service needs a 'restart' due to a config change>>
test1 (config) #
test1 (config) #
test1 (config) # hostname riverbed2
Web UI certificate does not match the configured hostname. You may have difficulty in accessing it securely. It is recommended that you generate or import a new certificate.
riverbed2 (config) #
riverbed2 (config) #
riverbed2 (config) #
riverbed2 (config) # write memory
riverbed2 (config) #
riverbed2 (config) #
riverbed2 (config) #
Re: Riverbed problem - % Internal error (code 1003)
Posted: Tue Oct 24, 2017 10:14 pm
by antman
Is there a way to create more inpath interfaces?
The default appears to have only one pair
wan0_0
lan0_0
how do I create below? When I try to add interface from default 4 to more (like 6 or 8), I get the EM1 interfaces instead.
lan0_1
wan0_1
Re: Riverbed problem - % Internal error (code 1003)
Posted: Wed Oct 25, 2017 9:04 am
by Uldis (UD)
Looks you have wrongly prepared image only, I just add 8 interfaces no no such issue observed