Support and News Forum

What is the actual challenge or hurdle with the ability to paste in configs to the startup-config window for a device, press save and have the device start with that configuration?

it works, just need to be sure you have set right interfaces matching lab nodes

I can not get it to work, I look in the startup config window, I see the device light up and see the config in the text window, then I turn on the device it goes to the do you want to go through the startup wizard. Am I missing something?

you missed that didnt watch video about initial cfg operations.
http://www.eve-ng.net/index.php/documentation/howto-s-2
video 9

This video is based on editing the startup files after you have already exported. Lets say I have a text document that I pulled from a working physical router, I have changed the interfaces to match what I have in the UNL topology and I want to paste those into the startup config section of the lap. I dont want to access every router in the lab via telnet and copy and paste the configs in each separate node.

This function is planned for PRO...

Stay tuned

Excellent. When is the tentative release for PRO version?