IDLE-PC issue for 7200

[dfafafyafa]

Hello UD,

I am facing an issue with dynamips and its idle pc. i have managed to applied the idle pc via the suggested in your website. but when i power on multiple 7200 it takes cpu 100 % for all other routers apart from the one executed from cli mode.



root@eve-ng:/tmp# top
top - 13:03:12 up 42 min, 3 users, load average: 1.34, 1.92, 1.79
Tasks: 252 total, 1 running, 251 sleeping, 0 stopped, 0 zombie
%Cpu(s): 31.4 us, 3.6 sy, 0.0 ni, 64.6 id, 0.2 wa, 0.0 hi, 0.2 si, 0.0 st
KiB Mem : 12433120 total, 8014548 free, 2983840 used, 1434732 buff/cache
KiB Swap: 6291452 total, 6291452 free, 0 used. 8938488 avail Mem

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
878 root 20 0 810392 209376 68388 S 106.2 1.7 5:05.99 dynamips------------------------this one is from gui selected 7200.
3650 root 20 0 552408 234320 221964 S 6.2 1.9 0:11.92 dynamips------------------------this one is from cli mode which is executed as in bracket(dynamips -P 7200 -t 7200 --idle-pc 0x62f224ac /opt/unetlab/addons/dynamips/c7200-adventerprisek9-mz.152-4.S6.image)


let me know if i am missing something.

Regards
DFA

[ramindia]

Hello UD,

I am facing an issue with dynamips and its idle pc. i have managed to applied the idle pc via the suggested in your website. but when i power on multiple 7200 it takes cpu 100 % for all other routers apart from the one executed from cli mode.



root@eve-ng:/tmp# top
top - 13:03:12 up 42 min, 3 users, load average: 1.34, 1.92, 1.79
Tasks: 252 total, 1 running, 251 sleeping, 0 stopped, 0 zombie
%Cpu(s): 31.4 us, 3.6 sy, 0.0 ni, 64.6 id, 0.2 wa, 0.0 hi, 0.2 si, 0.0 st
KiB Mem : 12433120 total, 8014548 free, 2983840 used, 1434732 buff/cache
KiB Swap: 6291452 total, 6291452 free, 0 used. 8938488 avail Mem

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
878 root 20 0 810392 209376 68388 S 106.2 1.7 5:05.99 dynamips------------------------this one is from gui selected 7200.
3650 root 20 0 552408 234320 221964 S 6.2 1.9 0:11.92 dynamips------------------------this one is from cli mode which is executed as in bracket(dynamips -P 7200 -t 7200 --idle-pc 0x62f224ac /opt/unetlab/addons/dynamips/c7200-adventerprisek9-mz.152-4.S6.image)


let me know if i am missing something.

Regards
DFA

First what is your hardware config ?
Second, can you start one by one and check, if you you turn all at a time, it shoot 100% cpu, once all boot up it may come down( but suggest method if you do not have enough resource, start one by one )

R!

[dfafafyafa]

i5,2.3ghz,4 core, 16gb ram.

i will try doing it one by one.

[ramindia]

i5,2.3ghz,4 core, 16gb ram.

i will try doing it one by one.

i5 and 16GB very less resources, compare to big Servers, you will be ok when you start one by one.

R!