Support and News Forum

Posted: **Sun Sep 03, 2017 4:34 am**

Hello UD,

I am facing an issue with dynamips and its idle pc. i have managed to applied the idle pc via the suggested in your website. but when i power on multiple 7200 it takes cpu 100 % for all other routers apart from the one executed from cli mode.

root@eve-ng:/tmp# top
top - 13:03:12 up 42 min, 3 users, load average: 1.34, 1.92, 1.79
Tasks: 252 total, 1 running, 251 sleeping, 0 stopped, 0 zombie
%Cpu(s): 31.4 us, 3.6 sy, 0.0 ni, 64.6 id, 0.2 wa, 0.0 hi, 0.2 si, 0.0 st
KiB Mem : 12433120 total, 8014548 free, 2983840 used, 1434732 buff/cache
KiB Swap: 6291452 total, 6291452 free, 0 used. 8938488 avail Mem

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
878 root 20 0 810392 209376 68388 S 106.2 1.7 5:05.99 dynamips------------------------this one is from gui selected 7200.
3650 root 20 0 552408 234320 221964 S 6.2 1.9 0:11.92 dynamips------------------------this one is from cli mode which is executed as in bracket(dynamips -P 7200 -t 7200 --idle-pc 0x62f224ac /opt/unetlab/addons/dynamips/c7200-adventerprisek9-mz.152-4.S6.image)

let me know if i am missing something.

Regards
DFA

Posted: **Sun Sep 03, 2017 6:15 am**

dfafafyafa wrote: ↑
Sun Sep 03, 2017 4:34 am
Hello UD,

I am facing an issue with dynamips and its idle pc. i have managed to applied the idle pc via the suggested in your website. but when i power on multiple 7200 it takes cpu 100 % for all other routers apart from the one executed from cli mode.

root@eve-ng:/tmp# top
top - 13:03:12 up 42 min, 3 users, load average: 1.34, 1.92, 1.79
Tasks: 252 total, 1 running, 251 sleeping, 0 stopped, 0 zombie
%Cpu(s): 31.4 us, 3.6 sy, 0.0 ni, 64.6 id, 0.2 wa, 0.0 hi, 0.2 si, 0.0 st
KiB Mem : 12433120 total, 8014548 free, 2983840 used, 1434732 buff/cache
KiB Swap: 6291452 total, 6291452 free, 0 used. 8938488 avail Mem

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
878 root 20 0 810392 209376 68388 S 106.2 1.7 5:05.99 dynamips------------------------this one is from gui selected 7200.
3650 root 20 0 552408 234320 221964 S 6.2 1.9 0:11.92 dynamips------------------------this one is from cli mode which is executed as in bracket(dynamips -P 7200 -t 7200 --idle-pc 0x62f224ac /opt/unetlab/addons/dynamips/c7200-adventerprisek9-mz.152-4.S6.image)

let me know if i am missing something.

Regards
DFA

First what is your hardware config ?
Second, can you start one by one and check, if you you turn all at a time, it shoot 100% cpu, once all boot up it may come down( but suggest method if you do not have enough resource, start one by one )

R!

Posted: **Sun Sep 03, 2017 2:19 pm**

i5,2.3ghz,4 core, 16gb ram.

i will try doing it one by one.

Posted: **Sun Sep 03, 2017 10:46 pm**

dfafafyafa wrote: ↑
Sun Sep 03, 2017 2:19 pm
i5,2.3ghz,4 core, 16gb ram.

i will try doing it one by one.

i5 and 16GB very less resources, compare to big Servers, you will be ok when you start one by one.

R!

Support and News Forum

IDLE-PC issue for 7200

IDLE-PC issue for 7200

Re: IDLE-PC issue for 7200

Re: IDLE-PC issue for 7200

Re: IDLE-PC issue for 7200