Support and News Forum

Has anyone been able to use a Palo Alto device running 8.0.5, and set the management interface correctly?

The commit completes, but the configuration does not apply to the interface. I have tried the usual reboot, checked everything several times etc

Cheers

This process works fine on another Palo Alto using 7.0.1 instead

Also work with no issues in PA 8.0 for my labs. Have not tried with anything higher than original 8 release.

i recommend disable dhcp client on management inerface and then set stat ip on it works like charm
vers 8.0.5

UD

Plao 8.0.5 works ON EVE