Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.
Moderator: mike
-
sandrino86
- Posts: 4
- Joined: Sat May 27, 2017 8:56 am
Post
by sandrino86 » Sat May 27, 2017 9:05 am
Hi All,
I have a problem with L3 switch, when I start this device random on the interface I receive %AMDP2_FE-6-EXCESSCOLL EthernetX/X TDR=0, TRC=0....
the Image I use is
iol/bin/L2-ADVENTERPRISEK9-M-15.2-IRON-20151.
Nobody of you have this problem?
Regards
-
ramindia
- Posts: 409
- Joined: Sun Mar 19, 2017 10:27 pm
Post
by ramindia » Sat May 27, 2017 1:34 pm
sandrino86 wrote: ↑Sat May 27, 2017 9:05 am
Hi All,
I have a problem with L3 switch, when I start this device random on the interface I receive %AMDP2_FE-6-EXCESSCOLL EthernetX/X TDR=0, TRC=0....
the Image I use is
iol/bin/L2-ADVENTERPRISEK9-M-15.2-IRON-20151.
Nobody of you have this problem?
Regards
Have you googled it before posting ? if not please spend sometime on the forums, this answered many times.
Quick solution below for you :
logging discriminator EXCESS severity drops 6 msg-body drops EXCESSCOLL
logging buffered 50000
logging console discriminator EXCESS
R!
-
sandrino86
- Posts: 4
- Joined: Sat May 27, 2017 8:56 am
Post
by sandrino86 » Tue May 30, 2017 9:30 am
Hi,
I insert this command:
logging discriminator EXCESS severity drops 6 msg-body drops EXCESSCOLL
logging buffered 50000
logging console discriminator EXCESS
but this doesn't solved my issue.
Regards
-
ramindia
- Posts: 409
- Joined: Sun Mar 19, 2017 10:27 pm
Post
by ramindia » Tue May 30, 2017 9:57 pm
sandrino86 wrote: ↑Tue May 30, 2017 9:30 am
Hi,
I insert this command:
logging discriminator EXCESS severity drops 6 msg-body drops EXCESSCOLL
logging buffered 50000
logging console discriminator EXCESS
but this doesn't solved my issue.
Regards
wr the config reboot and test
R!
-
rribeiro
- Posts: 2
- Joined: Thu Oct 12, 2017 11:50 am
Post
by rribeiro » Sat Dec 01, 2018 2:20 am
ramindia wrote: ↑Sat May 27, 2017 1:34 pm
sandrino86 wrote: ↑Sat May 27, 2017 9:05 am
Hi All,
I have a problem with L3 switch, when I start this device random on the interface I receive %AMDP2_FE-6-EXCESSCOLL EthernetX/X TDR=0, TRC=0....
the Image I use is
iol/bin/L2-ADVENTERPRISEK9-M-15.2-IRON-20151.
Nobody of you have this problem?
Regards
Have you googled it before posting ? if not please spend sometime on the forums, this answered many times.
Quick solution below for you :
logging discriminator EXCESS severity drops 6 msg-body drops EXCESSCOLL
logging buffered 50000
logging console discriminator EXCESS
R!
I guess that we are here to help each other. i am 100% sure that he tried his best to get the answer. If he asked some help here was because he was not able to find out the answer. Let's be less critic and help each other. Please!!!
-
Uldis (UD)
- Posts: 5180
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
-
Contact:
Post
by Uldis (UD) » Sat Dec 01, 2018 10:09 am
This problem is solved in EVE Pro.
Any older IOL image which gave this error, no more such on EVE Pro