How does the node bridge to the LAN?

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
jianghanyu
Posts: 3
Joined: Thu Jun 08, 2017 4:43 pm

How does the node bridge to the LAN?

Post by jianghanyu » Thu Jun 08, 2017 5:06 pm

Hi guys,
I want to bridge node to my PC's LAN, so I set up a network object and select the type is bridge, then connect 3725's F0/0 to the network object, however, the 3725 Can not successfully ping my PC.
3725's f0/0 IP address:172.16.0.222
My PC's IP address:172.16.0.113

Is it my way wrong?
You do not have the required permissions to view the files attached to this post.
Top
Uldis (UD)
Posts: 5178
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:
Contact Uldis (UD)

Re: How does the node bridge to the LAN?

Post by Uldis (UD) » Thu Jun 08, 2017 7:04 pm

change type bridge to cloud0, it your home LAN subnet
Top
jianghanyu
Posts: 3
Joined: Thu Jun 08, 2017 4:43 pm

Re: How does the node bridge to the LAN?

Post by jianghanyu » Mon Jun 12, 2017 3:20 am

Thanks, I've done it according to your instructions，but the 3725 still can not successfully ping my PC, the ARP table learning is normal. My EVE installed on ESXI, Is there any special setting?
Top
Uldis (UD)
Posts: 5178
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:
Contact Uldis (UD)

Re: How does the node bridge to the LAN?

Post by Uldis (UD) » Mon Jun 12, 2017 6:47 am

yes, be sure that your vswitc on the ESXi has enabled promiscue mode !!
Top
jianghanyu
Posts: 3
Joined: Thu Jun 08, 2017 4:43 pm

Re: How does the node bridge to the LAN?

Post by jianghanyu » Tue Jun 13, 2017 2:43 pm

Hi Uldis,
I have enabled the vswitch on the ESXi promiscue mode, it's working. Thanks!
Top
Post Reply

Return to “EVE-NG Help-Desk”