press Enter to get to the prompt

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
mnasim
Posts: 11
Joined: Tue Mar 30, 2021 1:11 pm

press Enter to get to the prompt

Post by mnasim » Tue Mar 30, 2021 1:49 pm

Hello everyone,
I just purchased eve-ng-pro and all my old labs were imported from eve-ng-community.
all imported "dynamips" labs stuck at this message press Enter to get to the prompt when i try to run any lab (7200 or 3725). However, If i add a new 7200 router to the lab, the newly added router works very fine.
This means that the image itself is fine. Images and labs were working on eve-ng-community and my colleagues who imported my labs to their eve-ng-community found labs are working nicely without any problem.
also, all IOL/Qemu labs are working correctly. The problem is in dynamips only.

anyone stuck in this situation!!
Top
Uldis (UD)
Posts: 5180
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:
Contact Uldis (UD)

Re: press Enter to get to the prompt

Post by Uldis (UD) » Wed Mar 31, 2021 8:00 am

Set 256Mb ram for 7200 series dynamips nodes
Top
mnasim
Posts: 11
Joined: Tue Mar 30, 2021 1:11 pm

Re: press Enter to get to the prompt

Post by mnasim » Wed Mar 31, 2021 11:07 am

Thank you very much
It worked after changing RAM to 256MB .. it was 512MB
Top
Post Reply

Return to “EVE-NG Help-Desk”